پاور بانک دارای خروجی های 5 ولت 1 آمپر و 5 ولت 2 آمپر می باشد.
رنگ سفید-فاقد باطری
Charging cut-off voltage: 4.2V
Discharge cut-off voltage: 3V
Input Interface: MicroUSB Input voltage: 5V Input Current: 1A (press button for 5 seconds to enter 2A fast charge mode)
USB1 Output voltage: 5V Output Current: 1A
USB2 Output voltage: 5V Output Current: 2A
Charging identification 1: 1A port shorted D + D-
Charging Identification 2: 2A charging port built IPHONE identification resistor
Protection: Hardware lithium overcurrent, overvoltage, undervoltage protection, output short circuit protection hardware, software, overcurrent, undervoltage protection barrier
Support 2A fast charge mode, connect 2A charger, press the switch for 5 seconds, the display is switched to IN 2.1A, that is, into the fast charge mode, the actual measured charging current up to 1.8A.
Tip: If you can not reach 2A charger output, do not use the fast charge mode!
1.18650 parallel load, do not take a negative anyway!
2. If the display is connected to the battery, the charger activates the next to be inserted
3. DO be careful not to touch the circuit board after hand-powered, do not use any conductive objects touch the circuit board
4. Assembly mobile power need to have some basic electronic, skilled in the use of iron and other common tools multimeter
Remember that the battery positive and negative positions! Install the wrong polarity very serious consequences!